Vivinavi : Orange County : (United States) Orange

• ペタペタ
• 2022/09/25 (Sun) 21:11
• Report

The title is wrong too... It's embarrassing 😅I wrote it while saying Do it yourself...

Sorry for my question. I'm sorry, I didn't mean it wasn't dry, but it was sticky. ？

For example, when I want to buy a house and go to look at it, it looks beautiful but the paint is painted and it sounds like it is peeling off when you open and close the drawers and cabinets. I feel that the paint I am using is not suitable for what I want to use it for, but the question is ？ what should I use for what I want to do?

I am thinking without the second one about putting vinyl on it. It would be inconvenient to lose the hardness of the table for something like writing.

As #4 says, it would be better to read the usage instructions, but I think it is easy to recommend the wrong product in the first place.

I would buy new but I have memories and would like to use it if possible. Only the table top is deteriorating. It seems that there have been many times when water was spilled and not wiped up immediately.

I know that the method of number 4 is to file it properly first, then stain and finish coat ？ (the filing method is very helpful 🙏)

When you did the DIY coffee table Can you tell me what products you used ？ 🙏 🙏.

• 倍金万
• 2022/09/26 (Mon) 08:45
• Report

It doesn't say whether you are painting with a brush or using a sprayer, which is it?

I mainly use spray paint when painting small areas such as furniture and accessories. Spraying seems to be easy, but it is more difficult than painting with a brush. You have to spray from the outside of the object to be painted, passing through it at an absolutely even speed and stopping the spray after it has completely passed through. If the object is diagonal or vertical, run the spray thinly and never apply it thickly. If you apply the paint too thickly, the paint will drip there.

For table tops, apply a final coat of clear paint evenly to make the finished product shine like a glass surface.

Painting is difficult. If you make a mistake, you have to wait for the paint to dry completely before sanding again.

Painting walls, on the other hand, is a completely different method, mainly with a roller rather than a brush, which is faster and more extensive, but also takes some time to get used to. Recently, I had to repaint the entire bathroom ceiling because it had turned black due to partial mold growth caused by moisture.

• Zure
• 2022/09/26 (Mon) 09:15
• Report

You're still all over the place ！ The board owner is looking for a better way to do it. He didn't say whether it's spray or brush, so that's not part of it ？.

• 無知
• 2022/09/26 (Mon) 10:44
• Report

I don't want to be an old man like him.
In general, wall paint and roller paint are two totally different things

There are two main types of paint: water-soluble and enamel paint.　For walls, I use water-soluble paint, but for furniture, I use enamel paint
Before painting, mix the paint well with a stick. If you don't do this, the paint will be sticky forever.
Let it dry in a well-ventilated place. If it dries a little, you can use a fan. Repeat several times. If you apply two coats before it dries, it will be sticky forever
And it should be fine.　By the way, the material is wood ？.

• pooske
• 2022/09/26 (Mon) 12:16
• Report

I use these.

https://www.homedepot.com/b/Paint-Interior-Wood-Stains/N-5yc1vZbo8p?catStyle=ShowProducts

Stain is classic. I have not experienced much success with the others.

https://www.homedepot.com/b/Paint-Interior-Wood-Stains/N-5yc1vZbo8p?catStyle=ShowProducts


Polyurethane. I think semiGloss is a good choice.

Watch various videos on youtube.